| Application | The combined gas control system with DKJ-02 carbon monoxide (CO) and NO₂ (nitrogen dioxide) gas detectors and US-12 central controller is designed for continuous monitoring of toxic combustion gases in rooms where internal combustion engines, burners, or other thermal equipment. The system uses a reliable 4–20 mA signal, ensuring stable data transmission and easy integration into automatic safety and building management systems. DKJ-02 CO and NO₂ detectors continuously measure the concentration of hazardous gases in the air and transmit a proportional 4–20 mA signal to the central controller. The CO detector protects against invisible and odorless carbon monoxide, which poses a direct threat to human health, while the NO₂ detector is designed for early detection of nitrogen dioxide, a gas that irritates and damages the respiratory tract. The US-12 central controller receives signals from two detectors, analyzes them, and displays them on the screen in real time. When the set alarm limits are exceeded, the controller activates audible and visual signals and relay outputs that can be used to control ventilation systems, transmit warning signals, or integrate with other systems. This combined system is a reliable solution for underground car parks, garages, tunnels, boiler rooms, industrial and technical premises where effective protection against the effects of CO and NO₂ on human health is required and a safe and normative air quality level is ensured. Service pole up to 150m2 |
| DKJ-02 CO gas detector | Detectable gases: carbon monoxide (CO) Measurement principle: electrochemical Measurement range: 0–300 ppm (other ranges available on request) Output signal: 4–20 mA (proportional to CO concentration) Supply voltage: 12–24 V DC Power consumption: ≤ 2 W Measurement accuracy: ±5 % F.S. Response time (T90): < 30 s Operating temperature: –20 °C … +50 °C Ambient humidity: up to 95 % RH (non-condensing) Housing material: aluminum Protection class: IP67 Mounting height: in the breathing zone (approx. 1.5 m above the floor) Mounting: wall-mounted |
| DKJ-02 NO2 gas detector | • Measurement principle: electrochemical • Measurement range: 0–30 ppm (other ranges available on request) • Output signal: 4–20 mA (proportional to NO₂ concentration) • Supply voltage: 12–24 V DC • Power consumption: ≤ 2 W • Measurement accuracy: ±5 % F.S. • Response time (T90): < 30 s • Operating temperature: –20 °C … +50 °C • Ambient humidity: up to 95% RH (non-condensing) • Housing material: aluminum • Protection class: IP67 • Mounting height: in the breathing zone (approx. 1.5 m above the floor) • Mounting type: wall |
| US-12 control panel 4-20mA | • Number of channels: 2 • Supported sensors: CO, LPG, CH₄, etc. (with 4–20 mA output) • Power supply: AC 100–260 V, 50/60 Hz • Display: digital (concentration and status display) • Alarm levels: AL1 / AL2 • Signaling: audible and visual • Relay outputs: 4 relays (NO / NC) • Housing type: plastic, wall-mounted • Protection class: IP40 • Operating temperature: 0 °C … +40 °C • Mounting: wall-mounted |
| Warranty | 24 mėn |
Siekdami užtikrinti geriausią patirtį, naudojame tokias technologijas kaip slapukai, kad išsaugotume ir (arba) gautume prieigą prie įrenginio informacijos. Sutikdami su šiomis technologijomis galėsime apdoroti tokius duomenis kaip naršymo elgsena ar unikalūs ID šioje svetainėje. Nesutikimas arba sutikimo atšaukimas gali turėti neigiamos įtakos tam tikroms funkcijoms ir savybėms.