| Application | The combined gas control system with DKJ-02 carbon monoxide (CO) and LPG (propane-butane) gas detectors and US-12 central controller is designed to simultaneously monitor several types of hazardous gases and ensure a high level of safety in premises. The system operates using a reliable 4–20 mA signal, making it easy to integrate into industrial and building management systems. DKJ-02 detectors continuously measure CO and LPG gas concentrations and transmit the data to the US-12 controller, which analyzes it in real time, displays it on the screen, and activates audible and visual alarms and relay outputs when the set limits are exceeded. The system allows automatic control of ventilation, gas supply shutdown, or transmission of an alarm signal to external systems. This solution is particularly suitable for boiler rooms, garages, kitchens, technical and industrial premises where control of both combustible LPG gas and toxic CO is important. Service area up to 150m2 |
| DKJ-02 CO gas detector | Detectable gases: carbon monoxide (CO) Measurement principle: electrochemical Measurement range: 0–300 ppm (other ranges available on request) Output signal: 4–20 mA (proportional to CO concentration) Supply voltage: 12–24 V DC Power consumption: ≤ 2 W Measurement accuracy: ±5 % F.S. Response time (T90): < 30 s Operating temperature: –20 °C … +50 °C Ambient humidity: up to 95 % RH (non-condensing) Housing material: aluminum Protection class: IP67 Mounting height: in the breathing zone (approx. 1.5 m above the floor) Mounting: wall-mounted |
| DKJ-02 LPG gas detector | Measuring principle: catalytic (for combustible gases) • Measuring range: 0–50% LEL • Output signal: 4–20 mA (proportional to gas concentration) • Supply voltage: 12–24 V DC • Power consumption: ≤ 3 W • Measurement accuracy: ±3 % F.S. • Response time (T90): < 30 s • Operating temperature: –20 °C … +50 °C • Ambient humidity: up to 95% RH (non-condensing) • Housing material: aluminum • Protection class: IP67 • Mounting height: close to the floor (LPG gas is heavier than air) • Mounting type: wall or bracket |
| US-12 control panel 4-20mA | • Number of channels: 2 • Supported sensors: CO, LPG, CH₄, etc. (with 4–20 mA output) • Power supply: AC 100–260 V, 50/60 Hz • Display: digital (concentration and status display) • Alarm levels: AL1 / AL2 • Signaling: audible and visual • Relay outputs: 4 relays (NO / NC) • Housing type: plastic, wall-mounted • Protection class: IP40 • Operating temperature: 0 °C … +40 °C • Mounting: wall-mounted |
| Warranty | 24 months |
Siekdami užtikrinti geriausią patirtį, naudojame tokias technologijas kaip slapukai, kad išsaugotume ir (arba) gautume prieigą prie įrenginio informacijos. Sutikdami su šiomis technologijomis galėsime apdoroti tokius duomenis kaip naršymo elgsena ar unikalūs ID šioje svetainėje. Nesutikimas arba sutikimo atšaukimas gali turėti neigiamos įtakos tam tikroms funkcijoms ir savybėms.