Combined gas control system CO (carbon monoxide) and methane gas detector DKJ-02 with US-12 central controller 4-20mA

Enquire about price

ApplicationThe combined gas control system with DKJ-02 carbon monoxide (CO) and methane (CH₄) gas detectors and US-12 central controller is designed to simultaneously monitor toxic and explosive gas concentrations in rooms where combustion processes or natural gas are used. The system operates using a reliable 4–20 mA signal, ensuring stable data transmission and easy integration into automatic safety and control systems. DKJ-02 detectors continuously measure the concentration of CO and methane in the air and convert it into a proportional 4-20 mA signal. The CO detector is designed to protect people from the dangerous effects of carbon monoxide, while the methane detector is designed for early detection of combustible gas leaks and reduction of explosion risk. The US-12 central controller receives signals from both detectors, analyzes them, and displays them on the screen in real time. When the set alarm limits are exceeded, the controller automatically activates audible and visual signals and relay outputs that can be used to control ventilation systems, shut off gas supply, or transmit signals to other systems. This combined system is a reliable solution for boiler rooms, garages, technical and industrial premises where both the protection of people from CO and the prevention of methane leaks and explosions are important. Service area up to 150m2
DKJ-02 CO gas detectorDetectable gases: carbon monoxide (CO) Measurement principle: electrochemical Measurement range: 0–300 ppm (other ranges available on request) Output signal: 4–20 mA (proportional to CO concentration) Supply voltage: 12–24 V DC Power consumption: ≤ 2 W Measurement accuracy: ±5 % F.S. Response time (T90): < 30 s Operating temperature: –20 °C … +50 °C Ambient humidity: up to 95 % RH (non-condensing) Housing material: aluminum Protection class: IP67 Mounting height: in the breathing zone (approx. 1.5 m above the floor) Mounting: wall-mounted
DKJ-02 methane gas detectorMeasuring principle: catalytic (for combustible gases) • Measuring range: 0–50% LEL • Output signal: 4–20 mA (proportional to gas concentration) • Supply voltage: 12–24 V DC • Power consumption: ≤ 3 W • Measurement accuracy: ±3 % F.S. • Response time (T90): < 30 s • Operating temperature: –20 °C … +50 °C • Ambient humidity: up to 95% RH (non-condensing) • Housing material: aluminum • Protection class: IP67 • Mounting height: close to the floor (LPG gas is heavier than air) • Mounting type: wall or bracket
US-12 control panel 4-20mA • Number of channels: 2 • Supported sensors: CO, LPG, CH₄, etc. (with 4–20 mA output) • Power supply: AC 100–260 V, 50/60 Hz • Display: digital (concentration and status display) • Alarm levels: AL1 / AL2 • Signaling: audible and visual • Relay outputs: 4 relays (NO / NC) • Housing type: plastic, wall-mounted • Protection class: IP40 • Operating temperature: 0 °C … +40 °C • Mounting: wall-mounted
Warranty24 months

Enquire about the price or balance: